My Account
|
Customer Service
|
View Cart
Solutions For:
Commercial Roofers
RV Repairs
Online Resource Center
Bulletins & Data Sheets
Installation Instructions
Online Video Library
Article Library
Solution Centers
Store Finder
EternaBond® Distributors
Social Media Hub
Made In The USA.
Installation Instructions
Repair a RV polyethylene holding tank
Tools required: AlumiBond
Here is an extreme crack in a polyethylene tank.
Drill a hole at each end to keep the crack from spreading.
Measure the amount of AlumiBond required. Go 2 inches beyond the end of the crack in each direction.
Remove approximately 3-4 inches of release liner to get started.
Apply AlumiBond to crack.
Once installed, rub into place using moderate pressure, and apply a second piece over the first.
Job Complete!
Allow to stand for 12 hours before refilling tank.