Installation Instructions

Modified Roof Repair Using Gray RoofSeal and EternaPrime®

Tools required: EternaBond® RoofSeal and EternaPrime®

A failed seam on a previously repaired modified roof.
Because this repair was done at
20°F, we pre-treat the roof with EternaPrime®. Allow 30 minutes to dry.
Remove approximately 6" of protective release liner and apply EternaBond®.
Apply pressure with a roller or by hand to activate bonding process. Continue to remove release liner and apply tape, rubbing as you advance.
This crack is repaired for good! Low cost, no mess, no waste, easy, permanent.