Solutions For:
Online Resource Center
Store Finder
|
Data Sheets & Bulletins
"Wet-In"
Wetting-in is the same as soaking-in to a surface... a drop of water wets-in to dry concrete... it does not wet-in to glass. When EternaBond® MicroSealant® tapes are applied to a surface and rubbed or rolled with pressure, they immediately begin to "wet-in" to the surface and start to fuse or bond to that surface at a molecular level, becoming one with the surface. The rolling or rubbing pressure activated this bonding process. Surfaces sealed with EternaBond® MicroSealant® tapes are water proof, corrosion proof, and wind resistant virtually immediately.
|
|
|