 |
 |
|
 |
|
Installation Instructions
Cold Weather Installation using EternaPrime, DoubleStick and gray RoofSeal* this installation was done on a zero (0° F) degree day. |
|
 After marking the hold cutting it, coat the tape contact once in EternaPrime. Allow to dry (30 min).*Do not use EternaPrime on PVC. To install EternaBond on PVC in cold temperatures (40° F or below), go to PVC and EternaBond |
 |
 Put DoubleStick on the foot of the curb (underside).
|
 |
 Set in place and secure it down.
|
 |
 Counter flash the cone with RoofSeal.
|
 |
 Done!
|
 |
Please email us with comments or problems.
Home | Shopping Cart | Policies | Contact Us
 |
Copyright © 2008, EternaBond. All Rights Reserved