Peel, Stick, Stuck EternaBond - Instant, Permanent Leak Repair!
Microsealant Technology
USACanadaUKGermanyFranceAustralia/New Zealand - Coming Soon
 Home
Solution Centers
RV Repairs
Roof Repairs
Repair Professionals (RV Techs, Roofing, Maintenance)
Pond & Pool Repairs
Products
RV Products
Roof Repair Products
Resources & Info
Bulletins & Data Sheets
Instructions
Online Video Library
Magazine Articles
Policies
FAQ
Testimonials
Contact Us
Warranty
Articles
Standing Seam Metal Roof Restoration
Building Leaks
Hypalon Roof Repair And Maintenance
Leak Repair
Metal Roof Repair And Maintenance
Motor Home And RV Roof Repair And Maintenance
PVC Roof Repair And Maintenance
Roof Repair
Rubber (EPDM) Roof Repair
Seam Repair And Maintenance
TPO Roof Repair And Maintenance
More Articles...

 

Installation Instructions

Easy to Install - Permanent Results!

Repair a RV polyethylene holding tank using A-Seal

(This can be done with the tank in place or removed for easier access.) 
Step 1
Here is an extreme crack in a polyethylene tank.
Step 1
Step 2 Drill a hole at each end to keep the crack from spreading. Step 2
Step 3 Measure the amount of A-Seal required.

Go 2 inches beyond the end of the crack in each direction.

 Step 3
Step 4 Remove approximately 3-4 inches of release liner to get started. Step 4
Step 5 Apply A-Seal to crack. Step 5
Step 6 Once installed, rub into place using moderate pressure, and apply a second piece over the first.
Step 7 Job Complete!

Allow to stand for 12 hours before refilling tank.

 

Please email us with comments or problems.

Home  |  Shopping Cart  |  Policies  |  Contact Us

Credit Cards

Copyright © 2008, EternaBond. All Rights Reserved